GZ1050 Lamp holder c/w 250mm leads

GZ1050 Lamp holder c/w 250mm leads

60-400VA LED 1 Gang 2 Way Zero Cross Rotary Dimmer

60-400VA 1 Gang 2 Way Zero Cross Rotary Dimmer

 

Suitable for control of dimmable compact fluorescent and LED lamps, dimmable electronic transformers, LED drivers, toroidal transformers and tungsten lamps. Integrated trimming potentiometer allows CFL and LED lamps to be set at a minimum level to prevent them going out or flickering at the bottom of the dimmer range. Leading edge phase control. For use with resistive and inductive loads. Integrated over-temperature protection fuse. Module case ultrasonically sealed to reduce. dimmer buzzing. Smooth dimming operation from 0-100% light output. May be fitted to most dimmer plates. One or two way switching. Complies with the latest Electrical Safety standard for dimmer switches EN 60669-2-1:2000. EMC compliance - EN 55015. 1 Year guarantee.

 
Availability: In stock
SKU
AU-DSP400X
  • Suitable for control of dimmable compact fluorescent and LED lamps, dimmable electronic transformers, LED drivers, toroidal transformers and tungsten lamps
  • Integrated trimming potentiometer allows CFL and LED lamps to be set at a minimum level to prevent them going out or flickering at the bottom of the dimmer range
  • Leading edge phase control
  • For use with resistive and inductive loads
  • Integrated over-temperature protection fuse
  • Module case ultrasonically sealed to reduce
  • dimmer buzzing
  • Smooth dimming operation from 0-100% light output
  • May be fitted to most dimmer plates
  • One or two way switching
  • Complies with the latest Electrical Safety standard for dimmer switches EN 60669-2-1:2000
  • EMC compliance - EN 55015
  • 1 Year guarantee
  • Input Voltage (Min):220 V
  • Input Voltage (Max):250 V
  • Input Voltage Type:AC
  • Nominal Power:60-400W
  • Length:62 mm
  • Width:26 mm
  • Height:25 mm
  • Guarantee:1 Year
Write Your Own Review
You're reviewing:60-400VA LED 1 Gang 2 Way Zero Cross Rotary Dimmer
Your Rating